Stampede Trading Try It Free for 7 Days
Home › Learn › How to set a stop loss when day trading
PLAY #15 · LESSON · NOVEMBER 3, 2026

How to set a stop loss when day trading

Set your stop loss just below a level that, if broken, shows your trade idea was wrong, such as the recent low or a rising moving average. Then size the shares so hitting the stop costs only a dollar amount you chose in advance. Set it before you buy.

The short version

  1. Place the stop just below a chart level, not at a random percent.
  2. A stop order turns into a market order, so it can fill worse than your stop.
  3. Pick the stop first, then size the shares so a stop-out costs what you planned.
THE PLAYSet the stop first, then the size and targetENTRY PRICEBUYSTOPRISKTARGETREWARD123= where you buy= your stop: where you sell to cut the loss
  1. Pick your entry price (O) on the chart.
  2. Put your stop (X) just below the level that proves you wrong. The space between them is your risk.
  3. Then choose the shares and the target. If the reward is not bigger than the risk, skip the trade.
A sketch with made up numbers, not a real trade.
1

Where should you put a stop loss when day trading?

Put it just below a price level that proves your idea wrong, and decide it before you buy. A random number picked after the buy is only a hope.

Good levels are easy to find on a chart. Look for the low of the recent pullback, the pre-market low, or a rising moving average that price has been holding above.

If price falls below that level, the reason you bought is gone. That is the moment to be out, with a small loss you already accepted.

Here is the order of operations. It is the same every time:

1. Pick your entry price.

2. Find the level below it that, if broken, means you were wrong. Put the stop just under that level.

3. Measure the gap between entry and stop. That gap is your risk per share.

4. Only then choose how many shares to buy and where the target goes.

2

Why use a level instead of a random percent?

A level has a reason behind it, and a random percent does not. The chart does not know what percent you picked.

Say you buy a $10 stock and set a stop 1% away, at $9.90. Normal back and forth in a fast stock can touch that in seconds, and you are out of a trade that was still fine.

Now say the stop is 20% away because it felt safe. A single loss is now so large that you have to buy tiny size, or you risk more than you planned.

A level fixes both problems. It sits where the trade really stops making sense, and the distance to it tells you how many shares you can afford.

Percents are still useful as a plain rule. In the Stampede app, the Standard setting sells at +5% or -5%. The app's other options are Low risk at 3% and Aggressive at 8%. Check where that percent lands on your chart before you rely on it.

3

What is the difference between a stop order and a stop-limit order?

A stop order sells at the market once your stop price is reached, and a stop-limit order sells only at your limit price or better. The first aims to get you out. The second aims to control the price.

The SEC explains that when the stop price is reached, a stop order becomes a market order. A market order fills right away at the best price available, which may differ from your stop price.

FINRA says a stop-limit order uses the stop to activate a limit order. FINRA also warns that with a limit order there is a chance it does not get executed at all.

Put those together and you see the trade-off. A stop order is likely to fill but the price can be worse. A stop-limit order protects the price but may leave you still holding while the stock keeps falling.

There is no perfect choice. Pick one before the trade and know what it can and cannot do.

4

What is slippage and why does it matter in fast stocks?

Slippage is the gap between the price you expected and the price you actually got. It is biggest in fast, thin stocks.

The SEC notes that prices can change quickly in fast moving markets, and that by the time your order reaches the market the price could be slightly or very different. FINRA says the same about market orders: you might not get the price you saw, especially in fast moving markets.

A stop order becomes a market order when it triggers. So in a fast drop, your sale can fill below your stop price. If a stock opens far under your stop the next morning, the sale happens near that lower open.

Plan for it. Build a little room into your size, so that a worse fill than your stop still costs an amount you can live with.

5

How do you size the trade from your stop?

Divide the dollars you are willing to lose by the risk per share. The answer is the most shares you should buy.

Here is the math with made up practice numbers. You will risk $50 on a $10 stock, and your stop sits $0.50 below your entry, at $9.50.

1. Risk per share: $10.00 minus $9.50 is $0.50.

2. Shares: $50 divided by $0.50 is 100 shares.

3. Cost to buy: 100 shares at $10 is $1,000. If the stop hits at $9.50, you lose about $50, plus any slippage.

The free position size calculator does this for you. The gap and risk/reward calculator then checks that your target is worth the risk.

Practice this in a paper account first. This page is education, not financial advice.

6

Should you move your stop once the trade is open?

Only toward the price, never away from it. Moving a stop to give a losing trade more room turns a small planned loss into a bigger one.

If the stock rises, many traders raise the stop to follow it, so a winner is less likely to turn into a loser. That is a plan you can write down in advance.

If the stock falls toward your stop, leave it alone. The stop was set when you were calm and had the chart in front of you. Trust that version of you.

Your move

In a practice account, pick one stock, mark the level where your idea would be wrong, put the stop just under it, and work out the shares for a $50 risk.

Terms used

Plan a trade with our free position size calculator or gap and risk/reward calculator.

Sources

  1. SEC: Stop orders (a stop order becomes a market order when the stop price is reached)
  2. SEC: Trade Execution, What Every Investor Should Know (prices change quickly in fast markets)
  3. FINRA: Order types (market, limit, stop and stop-limit orders and their risks)

Lesson · November 3, 2026

Common questions

Where is the best place to put a stop loss?

Just below a chart level that proves your trade idea wrong, such as the recent low or a rising moving average. Choose it before you buy, then size the shares from the distance to it.

Is a stop order the same as a stop-limit order?

No. A stop order becomes a market order when your stop price is reached, so it should fill but maybe at a worse price. A stop-limit order sets a minimum price, but may not fill at all.

Can a stock fall past my stop loss?

Yes. In a fast drop or a gap at the open, the sale can fill below your stop price, because the stop turns into a market order. That is why you size the trade so a worse fill is still affordable.

Should I use a percent or a level for my stop?

A level that makes sense on the chart is usually better, since it ties the stop to a reason. A fixed percent is a simple rule, such as the Standard setting in the Stampede app, but check where it lands on the chart.

Do I need a stop loss on every day trade?

Every trade needs an exit plan for being wrong, whether that is a stop order or a price you act on yourself. Decide it before you buy, not after the stock starts to fall.

General education only, not financial or investment advice. Trading involves risk, and you can lose money.

Know when to buy. Know when to sell.

Stampede finds the stocks already on the move before the open and alerts your phone, so you do not have to stare at charts. Card needed to start your trial. Cancel anytime before day 7 and you pay nothing.

Try It Free for 7 Days